Important information

As a key supplier to the NHS, PHE and other critical life science sectors during the Covid-19 crisis, LTE is committed to ensuring the uninterrupted supply of its sterilization, decontamination, as well as laboratory thermal equipment including incubators, ovens and drying and solution/blanket warming cabinets.

Our UK production site remains fully operational and can offer some products from stock or on shortened lead times. Our Service Centre is continuing to operate a UK-wide team of engineers to carry out a full range of maintenance, service and testing to UKAS and HTM guidelines on both LTE and non-LTE brands of laboratory autoclaves, porous load sterilizers and washer-disinfectors.

Select Language:

OP Series Ovens

OP Series Ovens provide solid build quality and reliable performance and are ideal for a wide range of laboratory, research and industrial applications covering the scientific sector.

Available in sizes from 60 to 250-litres and with a wide range of temperatures ranging from 40°C to 250°C. The OP ovens come with a choice of heating element and control systems to suit any requirement. In order to take up minimal floor space, all models except the 250-litre can also be stacked.

The uni-program system offers single temperature selection and control at the push of a button. Multi-program controls will allow up to 8 multiple-step cycles to be stored in the memory at any one time, offering segment programming including ramps, dwells, stop and repeat functions.

Capacities: 60, 100, 150 and 250-litres
Temperature Range: 40°C to 250°C
Air Movement: Natural Convection and Fan Circulated options
Control System: Uni and Multi-program options

See below for key features and popular options

Key Features

Popular Options

More Information

Natural Convection or Fan Circulation

Choice of heating element, heat can be generated by natural convection or can be fan circulated depending on model required.

PID Control System

The PID control system is located next to the door on the front of the unit and the digital display shows both the set temperature and the current temperature of the unit.

Class 2 Over-Temperature Protection

A slot is fitted in the end of the spindle for setting the over temperature cut out. The reset button is immediately below and can only be reset after a fault when the temperature in the interior falls below its set point.

Anti-Bacterial Epoxy Powder Coating

All our OP Ovens are coated in anti-bacterial epoxy powder coating which is designed to combat destructive microbes and to protect against the growth and migration of bacteria.

Choice of Control Systems

Access Port 18mm

The access port allows for thermocouples to be fed into chamber. Can be fitted to the left, top or back panels and is positioned in the centre of the panel.

0-24 Hour Timer

Able to set a timer on the system so that when the chamber temperature reaches 2ºC below the set temperature the timer will start to count down to the set time. At end of timed period the heaters will be switched off, the circulating fan (if fitted) will continue to run.

Additional Shelves

As standard each OP Oven comes with either 2 or 3 shelves dependent upon model required. In addition to these we can supply additional shelves for the remaining shelf positions.

Stacking Kit

If you require more than one oven but need to maximise the use of your space we can provide a stacking kit which will allow for the secure stacking of two of our OP ovens and IP Incubators, this excludes the 250 Litre model.

Have a question about this product?

Fill out the form below and one of our representatives will be in touch with you shortly.

LEASING OPTIONS AVAILABLE DOWNLOAD PRODUCT BROCHURE REQUEST A QUOTE

You might also be interested in

IP Series Incubators

Swallow – Large Capacity Laboratory Incubators

Swallow – Large Capacity Laboratory Ovens

LTE Scientific

LTE Scientific

OP Series Ovens