phone icon Contact Us

Scope-Store ENT Endoscope Storage Cabinets

Scope-Store ENT The Scope-Store ‘ENT’ range from LTE Scientific has been specifically designed to provide drying and filtered air storage for a wide range of non-Scope-Store ENT Endoscope Storage Cabinet V20lumened flexible ENT scopes. The range comprises of 6 models with 2 levels of control: + and SE.

Scope capacities are 10 and 20. All models incorporate a built-in fan and HEPA filter system which delivers a high volume of 99.997% HEPA filtered air through the cabinet and maintains an over-pressure within the cabinet of at least 10 Pascals.

The hanger/holder system has been specifically designed to support ENT scopes and promote effective drying.

Our ‘+’ models incorporate a flexible and sophisticated touchscreen control system.

 

Touchscreen Controls

The Scope-Store ENT+ has an easy-to-use touchscreen control system. The menu-based interface allows details of each user and endoscope to be recorded easily, with relevant data being clearly displayed.

 

Scope Identification

Scope ID’s are pre-loaded into the control system. The identity of the scope and its location in the cabinet must be entered via the touchscreen before the door is released and the scope loaded. When the scope is to be removed, it must be logged out via the touchscreen in order to release the door. This procedure allows the scope to be fully traceable. Alternatively scopes can be scanned in and out of the cabinet using our barcode reader option.

 

Security, Monitoring and Traceability

Controlled access is one of the many features of the Scope-Store ENT+. A door interlock prevents anyone without a relevant PIN or barcode from gaining access to the cabinet. Individual PINs and barcodes are assigned to users who need access to the cabinet. Each entry and exit of the scope is recorded and attributed to the relevant user. The elapsed storage time of each scope is constantly displayed as a simple bar graph on the touchscreen. Any fault condition causes an audible or visible alarm. The monitoring system provides the clinician with a full picture of each scope’s storage cycle.

 

All data is recorded on a printer as standard and, optionally, can be stored on an internal archive or external PC via an independent monitoring system, which can also be linked to a departmental-wide track and trace system if required. Our ‘SE’ models are designed to offer the same air delivery system, but without the addition of the touchscreen control system. ‘SE’ models incorporate a push-button PIN door security system which will only release the door once the correct PIN has been entered. All Scope-Store ENT models are finished in our white ‘Sterling’ antibacterial epoxy powder coating

 

Technical & Ordering Information

Scope Store ENT

Model Scope-Store ENT10 Scope-Score ENT20
‘+’ Models 

SE’ Models

ENT/SST/V10

ENT/SST/V10SE

ENT/SST/V20

ENT/SST/V20SE

Scope Capacity 10 20 (2 compartments)
Scope Arrangement Vertical Hangers Vertical Hangers
Internal Dims, HWD, mm 1675 x 665 x 450 1675 x 665 x 450 per compartment
External Dims, HWD, mm 1925 x 1040 x 545 1925 x 1730 x 545
Hanger Details Scope holders with pull-out hanging rails  Scope holders with pull-out hanging rails
Control System Colour Touchscreen with individual PIN protection (+models) no control on ‘SE’ models  Colour Touchscreen with individual PIN protection (+models) no control on ‘SE’ models
Printer  Included on ‘+’ models only.
Not available on ‘SE’ models.
Included on ‘+’ models only.
Not available on ‘SE’ models.
Internal Lighting Included on ‘+’ models only.
Optional on ‘SE’ models.
Included on ‘+’ models only.
Optional on ‘SE’ models.
Glass Door Panel Included Included
Internal Data Archiving Available on ‘+’ models only.
Not available on ‘SE’ models.
Available on ‘+’ models only.
Not available on ‘SE’ models.
Temperature/ RH Monitor Available on ‘+’ models only.
Not available on ‘SE’ models.
Available on ‘+’ models only.
Not available on ‘SE’ models.
Barcode Reader Available on ‘+’ models only.
Not available on ‘SE’ models.
Available on ‘+’ models only.
Not available on ‘SE’ models.
Colour White anti-bacterial epoxy powder coating White anti-bacterial epoxy powder coating
Electrical Requirements 220/240V, 50Hz, 5A 220/240V, 50Hz, 5A

 

Download the product brochure for more information.

 

Download

Keep up to date with LTE ___ Sign up to our newsletter to receive news, product offers and stock updates.

LTE Scientific

LTE Scientific