Labclave 23 Autoclave

The new 23-litre vertical autoclave from LTE Scientific

The Labclave 23 is LTE Scientific’s new low-cost 23-litre laboratory autoclave. It has been designed to offer effective and fast sterilization of many laboratory load types including fluids, discard, glassware and instruments. Taking up a floor area of just 460mm x 395mm, Labclave 23 has to be one of the most compact and versatile units available..

Stainless Steel Pressure Vessel – This one piece pressure vessel is manufactured from high grade 304L stainless steel, and comes with a 5-year warranty against failure.

Push-Button Door Closure – Our ingenious door closure system seals and locks the door at the push of a button. The servo-assisted motor ensures a positive seal every time.

Flexible Control System – Labclave 23 comes with 8 pre-set programs covering the most popular sterilization cycle. In addition, a ‘free cycle’ is also provided, allowing you to set your own specific cycle parameters quickly and easily. See table for further details.

Printer – A complete record of every cycle is produced on this built-in thermal printer.

Post Vacuum System – Non-liquid cycles can achieve faster cycle times thanks to the built-in vacuum pump which will aid the cooling process and help dissipate moisture from the load.

Safety – Labclave 23 is fitted with pressure, temperature and timed door safety systems, ensuring that the door cannot be opened until the chamber has reached atmospheric pressure and 90ºC. A low water protection device is also fitted.

Air Cooled Condensate Unit – The inclusion of this feature allows the cooled condensate to be discharged directly to drain if required, although a waste container is provided as standard.

Cooling Options – For maximum flexibility, 4 types of cooling method are available on the Labclave 23:

• Slow cooling, no vacuum – Exhaust valve is permanently closed during cooling
  
• Slow cooling, vacuum – Exhaust valve opens at atmospheric pressure at which point vacuum pump initiates
  
• Fast cooling, no vacuum – Exhaust valve is open during cooling
  
• Fast cooling, vacuum – Exhaust valve is open and vacuum pump is on during cooling
  
  

Specifications and Ordering Information

Cycle Details